Home developed motor vibrators lot better than provided vibrators boost safety and production.
| Article Type: | Root Cause Analysis (RCA) |
| Category: | Mechanical |
| Equipment Type: | Pipelines and Miscellaneous Problems |
| Author: | S. Raghava Chari |
Note: This root cause analysis (RCA) is from real-time scenarios that happened in industries during the tenure of two or three decades ago. These articles will help you to improve your troubleshooting skills and knowledge.
Screen Vibrators
The product screens came with linear motion vibrators actuated by an I-shaped core attracted and released by E-shaped fixed laminated block, powered by electrical pulses provided by a solidstate electronic circuit. Such vibrators required very precise adjustments and locking.
At such vibration frequencies, the adjustments worked loose and necessitated frequent adjustments, which is extremely difficult in the high ambient temperature and pungent ammonia odorous screen room.
As a result screen availabilities were poor affecting production significantly. Â
Authors Solution
The author replaced the entire E/I core vibrators with motorized vibrators.
The rotor shaft carries adjustable eccentric weights because of which rotor rotation vibrates. Suitable links and spring transmit the motor vibration to the screen.
Thanks to the high reliability of the motorized vibrators production limitations vanished and plant produced at far higher than rated capacities.
Author: S. Raghava Chari
Do you face any similar issues? Share with us through the below comments section.
If you liked this article, then please subscribe to our YouTube Channel for Instrumentation, Electrical, PLC, and SCADA video tutorials.
You can also follow us on Facebook and Twitter to receive daily updates.
Read Next:
- Gas Cooler Re-tubing
- Rotary Granulator Drive
- Problems with Demister Pads
- Steam Letdown Station Problems
- Bucket elevators Chain Problems
