Hello Friend, today we will see how the food processing factory is packing the Tiffin box with the simple logic and timer-based process. These pack meals we enjoy in our day to day life.
Auto Tiffin Box Filling Station
Figure (a) shows the HMI screen for the operator from where the operator can start and stop the process.
Here the system has 3 sensors which act when the box come below them and as per the screen shown the box will get filled with
Figure(a) HMI screen for the operator
- The Cream at the bottom of the box
- The rice
- The paneer pieces on top
The cream gets fills when the Tiffin box moves on the conveyor towards left in progress with the filling of cream, rice and paneer pieces on top.
Here the conveyor belt is moving continuously. When we start the process. As we can see, there is a timer connected to the initial stage which means the filling of the Tiffin box should be done by the system in 60Sec. if the system fails to or any disturbance arises the system will display fault or jam in process parameter.
Setup
The proximity sensor near each SOV facing downward sense the Tiffin box as it comes under the sensor, according to individual sensing the SOV for 1 to 3 gets acts. The SOV (Solenoid coil ) acts on 24V DC.
As we give DO from the DCS, the Relay acts and SOV gets open.
- SOV-1 to 3 DO’s initially in OFF state
- Sensor 1 to 3 DI’s initially in ON stage
The below figure(b) & (c) shows the implementation and IO’s count assigned for the Program.
Figure(b) Logic
Figure (c) DO’s assigned for the Logic
Figure (d) DI assigned for Logic
Author: Jadhav Amit R
If you liked this article, then please subscribe to our YouTube Channel for PLC and SCADA video tutorials.
You can also follow us on Facebook and Twitter to receive daily updates.
Read Next:
- Water Level Control Logic
- Bottle Filling System
- Troubleshoot PLC Logic
- Lamp Control using PLC
- Mixing using PLC Example
