In this post, we will see the concept of a line choke or reactor.
Line choke is an inductance connected to the VFD input or output circuit. It is a component that forms a magnetic field as current flows through it and when the current increases, it limits the increment in current by producing a voltage or emf across it that opposes it.
This protects the VFD from unwanted spikes, transients, and harmonics. The reactor is used on either the input side or output side of the VFD.
When a reactor is used on the input side, it is called a line reactor and when it is used on the output side, it is called a load reactor.
Refer to the above image. The inductance is shown on the input side and the output side is nothing but the line choke. It is normally used for VFD’s which have a rating of more than 1 KVA. Let us understand its basic working.
It is not always necessary that a current wave be sinusoidal. When it is not sinusoidal, it contains harmonics. Harmonics are a large current distortion.
If you see the basic equation of an inductor, it is – V = L (di/dt)
Here, V is the voltage, L is the inductance of the choke or reactor, and (di/dt) is the rate of change of current.
As the current change rate increases, the voltage too increases in proportional to the inductance.
But, this induced voltage has the opposite polarity to that of the applied voltage. This automatically reduces the rate of current change and limits the current applied.
One more theory can be understood here for the output side of VFD. As a high switching frequency is produced at the output of VFD, sharp changes in voltage outputs are reflected sometimes.
This high spikes in voltage can damage the motor circuit or even heat the VFD itself. This can be reduced by using a line choke.
The line choke reduces the peak of the voltage waveform and increases the changing rise time of the signal; to stabilize the final output waveform.
The stabilized waveform will indirectly provide limited current and voltage output to the motor.
A load reactor is used when the distance between the motor and VFD is very large; mostly 100 feet or more.
Due to long-distance, voltage spikes are amplified more and this can affect the circuit in a large way. So, the line choke will limit this current to a safe limit.
This inductance plays a very important role in protecting the thyristors of the VFD from damage or overheating. Mostly, this device is used when several drives are connected in parallel closely; or the line power supply is imbalanced or largely variable, etc.
In this way, we understood the basic concept of the line choke.
If you liked this article, then please subscribe to our YouTube Channel for Electrical, Electronics, Instrumentation, PLC, and SCADA video tutorials.
You can also follow us on Facebook and Twitter to receive daily updates.
The conveyor sorting machine is widely used in the packing industries using the PLC program…
Learn the example of flip-flop PLC program for lamps application using the ladder logic to…
In this article, you will learn the STAR DELTA programming using PLC controller to start…
Lube oil consoles of rotary equipment packages in industrial process plants are usually equipped with…
Rotating equipment packages such as pumps, compressors, turbines need the lube oil consoles for their…
This article explains how to blink lights in ladder logic with a detailed explanation video…
View Comments
in practical oprational case some tims there is harmonices.how we reduce such conditions?the other critical thinkg here on the choking line in what mechanism?auto?
manually?penumatic? the technology limitation also limtted ,how you can imprve such manner/
thanks alot.
Thanks for this article,
I want to design line chokes.
Can you help me.