Write a PLC Program using START and STOP Buttons for the following PLC example.
There are three machines, each with its own start and stop buttons.
Any two machines may run at one time (also, anyone may run by itself).
Each start button is to have a sealing circuit.
Construct a PLC circuit with appropriate interlocking for this problem.
You can share the detailed explanation of above PLC ladder logic with comments section.
Author: Dr. D. J. Jackson
If you liked this article, then please subscribe to our YouTube Channel for PLC and SCADA video tutorials.
You can also follow us on Facebook and Twitter to receive daily updates.
Read Next:
Learn the example of flip-flop PLC program for lamps application using the ladder logic to…
In this article, you will learn the STAR DELTA programming using PLC controller to start…
Lube oil consoles of rotary equipment packages in industrial process plants are usually equipped with…
Rotating equipment packages such as pumps, compressors, turbines need the lube oil consoles for their…
This article explains how to blink lights in ladder logic with a detailed explanation video…
In this article, a simple example will teach you the conversion from Boolean algebra to…
View Comments
This nice material
The motor2 and 3 on line on should be in series not parallel. The same logic is required for the other control lines.