List of 100 Distributed Control Systems Questions (DCS)
Here’s a list of 100 Distributed Control Systems (DCS) questions related to industrial automation and control systems.
Serial Communication Error Checking Methods and Algorithms
Serial communication error checking methods and algorithms are parity bits, checksum, and cyclic redundancy checks for safe data transfer.
Comparison of Control Loops – Open, Closed, Cascade, Feedforward, Ratio
Control loops are the building blocks of control systems and come in various configurations such as open, closed, cascade, feedforward, ratio.
Site Commissioning Steps for PLC Programmers
Site commissioning steps for PLC programmers such as power-up, hardware checks, configure I/O, loop checks, logic testing and simulation.
Difference between DSP and DAC – Digital Electronics
Two of the most widely used circuits in digital electronics are DAC (digital to analog converters) and DSP (digital signal processors).
Comparison of Humidity Sensors – Industrial Instruments
The humidity sensors come in various types and are used to measure the moisture content in the air. Learn the comparison.
Best Practices of PLC Wiring – Programmable Logic Controller
Best practices of PLC wiring (Programmable Logic Controller) are essential for several reasons in industrial automation and control systems.
What Factors Affect the Stability of Flow Meter Readings?
The flow meter readings stability may be affected due to various issues in hardware, installation, configuration, calibration, or process conditions.
Phase Controlled Rectifier – Half Controlled Rectifier with R Load
A phase controlled rectifier converts AC to DC using thyristors or silicon-controlled rectifiers. Learn Half Controlled Rectifier R, RL, RLE Load.
Thyristor Protection Circuits (SCR) – Types, Principle, Explanation
Thyristor Protection circuits (SCR) used in power electronics to prevent various faults and overloads to ensure reliability and longevity of the circuit.