Classification of Gate Valves
Gate valves are available with a variety of disks. Classification of gate valves is usually made by the type disk
What is Gate Valve ?
A gate valve is a linear motion valve used to start or stop fluid flow; however, it does not regulate
Valve Functions and Basic Parts of Valve
valve is a mechanical device that controls the flow of fluid and pressure within a system or process. A valve
Area Velocity Flow Meter Principle
An Area Velocity Flow Meter continuously measures both Level and Velocity to calculate flow volume in an open channel or pipe.
Transit Time Flow Meter Principle
The Transit Time flow meter measures the time it takes for an ultrasonic signal transmitted from one transducer to cross a pipe and received by a second transducer.
Pneumatic Valves Questions & Answers
Pneumatic Valves Questions & Answers : Directional control valves start, stop or change the direction of flow in compressed air
Control Room Design Guidelines
There are two major aspects of control room design that should be taken into account in the Safety Report these
Temperature Standards
The most common technologies for industrial temperature measurement are electrical in nature: RTDs and thermocouples. As such, the standards used
PLC Analog Input Sampling Ladder Logic
Design PLC ladder logic program for Analog Input Sampling at the rate of 2Hz frequency and PLC outputs the average value. More PLC ladder logic lectures.
PLC Conveyor Ladder Logic Program
Basics of PLC Programming and examples. Design a PLC Conveyor Ladder Logic Program. Parts are to advance along the conveyor.