Animation Credits : KANSAI Automation
When the fork comes in contact with liquids/solid material, the frequency slightly changes, and this change in frequency is sensed by the electronic circuit which in turn send out a signal. This signal is processed to give out as a relay output either N.O or N.C. signal which in turn indicates Level signal either Low or High depends on application.
Vibrating Level Switch Working Principle |
Animation Credits : Endress Hauser
Learn an example PLC program to control a pump based on level sensors using ladder…
In the PLC timer application for security camera recording, when motion is detected then camera…
In this example, we will learn batch mixing with PLC ladder logic program using timer…
This PLC example on manufacturing line assembly is an intermediate-level PLC program prepared for the…
In this article, you will learn the PLC programming example with pushbutton and motor control…
This article teaches how to convert Boolean logic to PLC programming ladder logic with the…
View Comments
Mind blowing Animations. Very attractive and easy to learn.
very practical