Digital Electronics MCQ

Digital Electronics Objective Questions – Set 10

Practice free online digital electronics mock test and check your scores before the competition.

Practice Free Online Digital Electronics Mock Test

Digital Electronics Objective Questions

1. An EPROM

A) is programmable
B) all the answers
C) is non volatile
D) is of random-access type

2. A PROM

A) can be programmed any number of times
B) can be programmed only once
C) is mask programmed
D) is erasable by ultraviolet light

3. The process of entering information in EPROM is commonly known as

A) storing
B) writing
C) programming
D) none of the answers

4. An EPROM

A) is non erasable
B) volatile
C) programmable and erasable
D) erasable but not programmable

5. The address bus with a ROM of size 1024 × 8 bits is

A) 10 bits
B) 12 bits
C) 8 bits
D) 16 bits

6. In a read-only memory information can be stored

A) at the time of fabrication
B) by the user a number of times
C) by the user only once during its life time
D) in any of the above ways depending upon the type of memory

7. Which of the following shows the correct attachment of even parity bit to the data 00001001?

A) 000010011
B) 000001001
C) 100001001
D) 000010010

8. The hex address of the 256th memory location is

A) 00FFF
B) 000FF
C) 00100
D) 001FF

9. The largest positive number that can be stored in a computer that has 16-bit word length and uses two’s complement arithmetic is

A) 32,767
B) 32
C) 32,768
D) 65,536

10. An 8 × 4 ROM contains a decoder of size

A) 3 × 4
B) 3 × 8
C) 8 × 8
D) 8 × 4

Click on the below button to launch the Quiz.

All 30 questions and answers are available in the Quiz.

Share your answers with us through the below comments section.

Take All Tests :

You've successfully subscribed !

View Comments

Share

Recent Articles

  • PLC Tutorials

Conveyor Sorting Machine PLC Program with Calculation Function

The conveyor sorting machine is widely used in the packing industries using the PLC program…

5 days ago
  • PLC Tutorials

Example of Flip-Flop PLC Program for Lamps Application

Learn the example of flip-flop PLC program for lamps application using the ladder logic to…

5 days ago
  • PLC Tutorials

STAR DELTA Programming using PLC Controller

In this article, you will learn the STAR DELTA programming using PLC controller to start…

5 days ago
  • Instrumentation Design

Single and Three Phase Immersion Electrical Heaters Wiring Circuits

Lube oil consoles of rotary equipment packages in industrial process plants are usually equipped with…

3 days ago
  • Instrumentation Design

Immersion Heaters in Lube Oil Consoles

Rotating equipment packages such as pumps, compressors, turbines need the lube oil consoles for their…

5 days ago
  • PLC Tutorials

How to Blink Lights in Ladder Logic?

This article explains how to blink lights in ladder logic with a detailed explanation video…

4 weeks ago