Design a Water Pump PLC Program using CX-Programmer
Learn to design a water pump PLC program using CX-Programmer with dual modes: RTC activation and sensor-based control.
PLC Pump Logic
Example PLC Program to Control a Pump based on Level Sensors
Learn an example PLC program to control a pump based on level sensors using ladder diagram logic with a video explanation.
PLC Pump Control: 10 seconds ON & 20 seconds OFF
Design a program for PLC pump control such that the pump must be turned ON for 10 seconds and turned OFF for 20 seconds.
PLC Program Examples
Discuss different PLC program examples for Signal lamp task, Valve operation program and make an output switch off when any of the sensors activated.
Introduction to PLC Ladder Diagrams
A ladder diagram is read from left to right and from top to bottom. When the PLC is in run mode, it goes through the entire ladder program to the end.