What is an Orifice Flange? – Purpose and Applications
An Orifice Flange is used in combination with orifice meters to measure flow rate of oil, gas and other liquids conveyed by the pipeline.
An Orifice Flange is used in combination with orifice meters to measure flow rate of oil, gas and other liquids conveyed by the pipeline.
Why we must keep the Orifice Beta ratio between 0.3 to 0.7 values during orifice calculation, orifice design, and selection?
Why RTD installed after the Orifice Plate ? The location of the RTD (thermowell), positioned downstream of the orifice plate
Flow Measurement Pressure & Temperature Compensation. Orifice Flow Meters Temperature and Pressure Compensation requirement, purpose, advantages and formula
Orifice Drain hole is required in gas flow service where liquid entrapment may occur. Orifice Vent hole is required in liquid flow service where gas entrapment may occur.
Very basic does not imply obvious…i really like this statement. Very often the answer is very fundamental and basic to
Different types of Orifice plate Taps are Flange Taps, Corner Taps, Vena contracta taps. This article provides information on Orifice Tapping Location.
Orifice plates are typically sandwiched between two flanges of a pipe joint, allowing for easy installation for fluid to flow through the pipe.
The orifice plate is for flow measurement : an inexpensive yet effective primary sensing element. Study Orifice Flow Meters and Sensors.
Restriction orifice (RO) is used to achieve controlled or restricted flow of process medium. The orifice offers a restriction to the process flow.