In this post, we will understand the difference between open circuit and short circuit in electrical systems.
In an electrical system, there are two types of circuits that are related to the flow of current – an open circuit and a short circuit.
Many of us are familiar with these terms, but let us have a look at the difference between both of them. In this post, we will see the difference between an open circuit and a short circuit.
As the name implies, an open circuit means that the circuit is open and no current is flowing through it. Current always requires a path to flow; but when there is no path, then it is open.
Refer to the below figure. As you can see, there is a switch, battery, and load. When the switch is open, no current can flow through the load. This means the two terminals are disconnected and there will be no continuity.
Now, according to Ohm’s law, R=V/I. As the current is zero, resistance will be infinite.
Hence, in an open circuit, the current will be zero; some voltage drop will be present and resistance will be infinite. That is why, in the second image (above), it is depicted that an open circuit is equivalent to zero resistance.
As the name implies, a short circuit means that the circuit is short and a current is flowing through it. Current always requires a path to flow; and when there is a path, then it is short.
Refer to the below figure. As you can see, there is a switch and battery. When the switch is closed, the current can flow through the path. This means the two terminals are connected and there will be continuity.
Now, according to Ohm’s law, R=V/I. As the current is at its maximum value, resistance will be zero. Hence, in a short circuit, the current will be high; voltage drop will be zero and resistance will be zero.
That is why, in the second image, it is depicted that a short circuit is equivalent to zero resistance. A simple wire connected to the battery terminals directly is the best example of a short circuit; because a wire has negligible resistance.
Now, a short circuit also has a different term as a closed circuit. Basically, as the name implies, a closed circuit allows the current to flow as opposed to an open circuit. But, there will be some resistance in the path due to the load connected.
So, in a closed circuit, there will be some resistance and a nominal amount of current and voltage in the path. All the normal loads that we use when it is on, comes under a closed circuit. Refer to the below image for understanding.
The below points shows the difference between the open circuit and short circuit.
In this way, we saw the difference between an open circuit and a short circuit.
If you liked this article, then please subscribe to our YouTube Channel for Instrumentation, Electrical, PLC, and SCADA video tutorials.
You can also follow us on Facebook and Twitter to receive daily updates.
Read Next:
Learn an example PLC program to control a pump based on level sensors using ladder…
In the PLC timer application for security camera recording, when motion is detected then camera…
In this example, we will learn batch mixing with PLC ladder logic program using timer…
This PLC example on manufacturing line assembly is an intermediate-level PLC program prepared for the…
In this article, you will learn the PLC programming example with pushbutton and motor control…
This article teaches how to convert Boolean logic to PLC programming ladder logic with the…