In the world of industrial automation, theory only gets you so far. You know that a Distributed Control System (DCS) is the central brain of process operations. You know what the HART protocol does: it carries vital digital information over analog wires.
But can you confidently take a HART field device, integrate it into a DCS, configure the parameters, program the control logic, and troubleshoot it under live conditions?
If the answer is “not yet,” this course is designed specifically for you.
Distributed Control System Course with HART Protocol
We are thrilled to launch our brand new, deeply practical training: Distributed Control System Course with HART Protocol – Practical Automation Training.
Modern process plants no longer rely only on basic analog signals. Today’s automation systems demand diagnostics, secondary variables, remote configuration, and live health monitoring of field instruments. This is exactly where HART protocol integration in a Distributed Control System becomes essential.
This Distributed Control System Course is designed to bridge the real gap between theory and plant reality. This course focuses on actual DCS engineering tasks, live signal testing, and real control room workflows used by instrumentation and automation engineers.
If you want to understand how smart transmitters and control valves are really integrated, configured, and programmed inside a DCS via HART, this course is built for you.
This course focuses on the real-world videos of integrating field instrumentation with control systems through programming and live testing.
It teaches you:
- How 4–20 mA and HART coexist on the same loop
- How smart instruments communicate digital data over analog wiring
- How DCS systems map, read, and use HART variables
- How engineers configure transmitters and valves from the control room
- How live field data is fetched, displayed, and validated
What Makes This Course Different?
Most courses teach DCS and instrumentation separately. We teach them together, exactly how they exist in the field.
This course is built around practical application. We move quickly past definitions into the “how-to”:
- Hands-on Integration: Learn the step-by-step process of connecting HART-enabled field devices to DCS input/output cards.
- Practical Programming: Dive into the DCS engineering station to build control strategies, communicate with field devices, and interpret HART data.
- Live Testing & Troubleshooting: Watch live demonstrations of commissioning devices, forcing values, diagnosing faults using HART data, and verifying control loops.
DCS Course Curriculum
Below is the complete syllabus for the course. We have structured this to take you from fundamental concepts to advanced integration techniques.
| S.No. | Distributed Control System Course | Videos |
|---|---|---|
| 1 | Preview Session of the Distributed Control System Training Program | Video |
| 2 | Getting Started with Distributed Control Systems with HART Communication | Video |
| 3 | How 4–20 mA Current Loops Work in Industrial Control Systems | Video |
| 4 | Fundamentals of Smart Field Transmitters Using HART Technology | Video |
| 5 | Engineering Tools and Software Used in this Practical DCS Training | Video |
| 6 | Introduction to the DCS Engineering Software | Video |
| 7 | Remote Configuration of Smart Transmitters via Control Room Asset Tools | Video |
| 8 | Implement Temperature Measurement Programming Using DCS Function Blocks | Video |
| 9 | Live DCS Demonstration: Capture Smart Transmitter Data over HART and 4-20 mA Signals | Video |
| 10 | Setting Up DCS I/O Channels for HART Variable Mapping | Video |
| 11 | Reading and Integrating HART Data from Field Devices into DCS System | Video |
| 12 | Control Valve Basics for Automation and Instrumentation Engineers | Video |
| 13 | Overview of DCS Operator Graphics: Control Valve Feedback Indication Task | Video |
| 14 | Remote Configuration of Control Valve Positioners from the Control Room | Video |
| 15 | CENTUM VP Engineering: Programming Control Valve HART Data in IOM Modules | Video |
| 16 | Developing DCS Logic to Process Control Valve Feedback Signals | Video |
| 17 | CENTUM VP Graphics Engineering: Creating and Assigning Process Tag Names | Video |
| 18 | On-Site DCS Testing: Monitoring Live Process Variables in a Running Plant | Video |
Who Should Take This DCS Automation Training Course?
This course is ideal for:
- Instrumentation Engineers
- Automation Engineers
- DCS Engineers
- Control System Technicians
- Commissioning Engineers
- Engineering students entering process automation
What Makes This DCS Training Different?
- Real DCS engineering logic (not simulations)
- Live HART data reading and validation
- Control room–focused approach
- Clear explanation of why each step is required
- No unnecessary theory overload
- Designed from an engineer’s real project experience
This is the kind of knowledge usually learned only after years in the field.
How to Get Certified and Unlock Full Access?
You can join the course through the Automation Community website, where the complete learning structure is hosted.
👉 Course access link, Click Here
By joining the course on the Automation Community Website, you get:
- Structured Learning Path: All videos are organized logically without distractions.
- Assessments: Quizzes to test your knowledge retention.
- Lifetime Access: Learn at your own pace, anytime.
- Certificate: A verifiable Certificate of Completion upon finishing the course.
YouTube Membership & Certificate Access
A few advanced and exclusive videos – especially those involving deep configuration, live troubleshooting, and certification eligibility– require YouTube channel membership.
YouTube membership is required if you want:
- Access to exclusive course videos
- Course completion certificate from Automation Community
- Priority updates and advanced content
This allows learners to:
- Learn most topics for free
- Upgrade only if certification or advanced access is required
(Note: If you are already a YouTube channel member, ensure you register on the website to receive your certification eligibility.)
Conclusion
The Distributed Control System Course with HART Protocol – Practical Automation Training is built for engineers who want real skills, not just awareness.
If you want to:
- Understand smart instruments deeply
- Integrate HART devices correctly in DCS
- Program, configure, and test live signals
- Learn from real plant scenarios
This course will give you exactly that.
👉 Join the course via Automation Community
👉 Explore the full video list in the table above
👉 Upgrade to the YouTube membership for the certificate and exclusive content
Read Next:
- Siemens LOGO PLC Programming Course
- Omron PLC Programming Online Training Course
- Free Siemens Tia Portal PLC Course for Beginners
- Allen Bradley PLC Online Training Course
- Schneider PLC Automation Course
