Why we use NAMUR Output Sensor?
Proximity sensors and encoders can have NAMUR output NAMUR is a type of sensor output that gives an on or
Proximity sensors and encoders can have NAMUR output NAMUR is a type of sensor output that gives an on or
The current consumption of an industrial sensor is a very important consideration. Knowing the current consumption of all your devices
Detecting the presence or absence of a metal may seem like a fairly simple concept, but narrowing your selection to
The international standard IEC/EN 61508 has been widely accepted as the basis for the specification, design and operation of safety
Inhouse Moisture separator to remove moisture content for Pneumatic systems The moisture content is a specific challenge for the pneumatic system.This needs
Process Control In almost all industrial process applications, control of process variables is critical to the safe and efficient operation
Pressure systems in the process industry use different ways of sealing depending on the geographical region, size of the pressure
The 5-valve transmitter manifold is shown in the schematic below: 5 Valve Manifold During normal operation, the HP and LP
A three-valve manifold is a device that is used to ensure that the capsule will not be over-ranged. It also
The schematic diagram below shows the single block and bleed valve manifold. Transmitter valve manifolds also come in single