Current to Pressure (I/P) Converter Principle

Current to Pressure Converter works on flapper nozzle method. The input is 4 to 20mA signal and the equivalent output…

Ultrasonic Level Transmitter Principle, Limitations, Calibration and configuration

Measurement principle Continuous non‐contacting ultrasonic level measurement is based on the time of flight principle. An ultrasonic level instrument measures…

Three Way Electrical Switch Working Animation

Three Way Electrical Switch Alternative to the conventional connection for a three-way switch. The lamp shell is never connected to…

How to Communicate Modbus Poll Software with Mitsubishi PLC?

Learn how to communicate Modbus Poll software with Mitsubishi PLC using the Modbus RTU serial communication method.

How To Map Mitsubishi Analog Inputs on Weintek HMI?

Learn how to map Mitsubishi FX3U PLC analog inputs on a Weintek HMI screen using RS232 serial communication.

Read Mitsubishi PLC Analog Input and Display in HMI

Learn how to read analog input (potentiometer) from Mitsubishi PLC and display it on an HMI screen using EasyBuilder Pro.

Analog Voltage Control in PLC Using Weintek HMI MT6071IE

Control analog voltage in Mitsubishi PLC using Weintek MT6071IE HMI by sending input values to generate a 0–10V output.

Mitsubishi PLC + Weintek HMI: Analog Output Demo

Learn how to use EasyBuilder Pro with Weintek HMI to control analog output in Mitsubishi FX3U PLC. Simulate 0–4095 to 0–10V voltage output.

Mitsubishi PLC – Convert Integer to Float in Ladder Logic

Learn how to convert integer to float in Mitsubishi PLC using GX-Works2 ladder logic with FLT and INT conversion instructions.

How to Use Analog Output in Mitsubishi FX3U PLC?

Learn how to use analog output in Mitsubishi FX3U PLC to control external devices with 0–10V or 4–20mA signals with 12-bit resolution.

Scaling Analog Input to 0-100% in Mitsubishi FX3U PLC

Learn how to scale analog input signals to a 0–100% range in Mitsubishi FX3U PLC. Convert raw sensor data into percentage values.

Omron PLC Tutorial: Binary and BCD Instructions

Learn how to use Binary (++/--) and BCD (++B/--B) increment and decrement instructions in Omron PLC using CX-Programmer.

Omron PLC BCD Instructions in Ladder Diagram

Learn how to use BCD instructions like addition, subtraction, multiplication, and division in Omron PLC ladder diagrams using CX-Programmer.