Try mock test on digital electronics and check questions with corresponding answers.
1. When will be the output of a NOT gate is LOW ?
A) the input is LOW.
B) the input is HIGH.
C) none of the answers
D) the input is HIGH and LOW.
2. When will be the output of an exclusive-OR gate is HIGH?
A) The inputs are equal
B) All inputs are LOW
C) All inputs are HIGH
D) The inputs are different
3. How many input and output required for multiplexer?
A) One input and many output
B) None of the answers
C) One input and one output
D) Many input and one output
4. What is the requirement of full substractor circuit?
A) Two inputs and two outputs
B) Three inputs and two outputs
C) Three inputs and one output
D) Two inputs and three outputs
5. Which is the example of digital device from the given option ?
A) Record players
B) Thermistors
C) Microprocessors
D) Sensors
6. Choose the option which is not a code conversion standard
A) BCD code
B) Gray code
C) Excess-3 code
D) Truth code
7. The time required for a gate to change its output is called as
A) Decay time
B) run time
C) propagation time
D) start time
8. What is the radix of octal number system?
A) 2
B) 16
C) 8
D) 10
9. How many input and output required for demultiplexer?
A) one input and many output
B) one input and one output
C) number of selection inputs and one output
D) None of the answers
10. A single flip-flop can be cleared (reset) to
A) Both 1 and 0
B) 1
C) 0
D) None of the answers
Click on the below button to launch the Quiz.
All 30 questions and answers are available in the Quiz.
Share your answers with us through the below comments section.
Take All Tests :
Electrical Drives control the motion of electric motors. Motion control is required in industrial and…
PLC ladder logic design to control 3 motors with toggle switch and explain the program…
VFD simulator download: Master the online tool from the Yaskawa V1000 & programming software for…
The conveyor sorting machine is widely used in the packing industries using the PLC program…
Learn the example of flip-flop PLC program for lamps application using the ladder logic to…
In this article, you will learn the STAR DELTA programming using PLC controller to start…
View Comments
Easy question