Root Cause Analysis (RCA) related to a Plant Bucket Elevators chains too short chain lives problem eliminated.
Article Type: | Root Cause Analysis (RCA) |
Category: | Mechanical |
Equipment Type: | Pipelines and Miscellaneous Problems |
Author: | S. Raghava Chari |
Note: This root cause analysis (RCA) is from real-time scenarios that happened in industries during the tenure of two or three decades ago. These articles will help you to improve your troubleshooting skills and knowledge.
For no immediately seen reasons Bucket Elevators chain lives were poor.
After few thinking days the author concluded, since all else are OK excessive chain overload could be a cause. Buckets running ¾ full against the thumb rule of max ½ full supported this surmise.
The author got 30 mts of elevator delivery collected and weighed. Indeed, the conveying rate was 2½ times design rate
Since all else are OK excessive chain overload could be a cause. Buckets running ¾ full against the thumb rule of max ½ full supported this surmise.
The author got 30 mts of elevator delivery collected and weighed. Indeed, the conveying rate was 2½ times design rate
Proper process adjustments reduced the fill to 40% and thus the conveying rate was 80% of design production loss. Chain lives exceeded four years.
Author: S. Raghava Chari
Do you face any similar issues? Share with us through the below comments section.
If you liked this article, then please subscribe to our YouTube Channel for Instrumentation, Electrical, PLC, and SCADA video tutorials.
You can also follow us on Facebook and Twitter to receive daily updates.
Read Next:
In this article, you will learn the PLC cooking timer example for kitchen automation using…
Learn an example PLC program to control a pump based on level sensors using ladder…
In the PLC timer application for security camera recording, when motion is detected then camera…
In this example, we will learn batch mixing with PLC ladder logic program using timer…
This PLC example on manufacturing line assembly is an intermediate-level PLC program prepared for the…
In this article, you will learn the PLC programming example with pushbutton and motor control…