Inst ToolsInst ToolsInst Tools
  • Courses
  • Automation
    • PLC
    • Control System
    • Safety System
    • Communication
    • Fire & Gas System
  • Instrumentation
    • Design
    • Pressure
    • Temperature
    • Flow
    • Level
    • Vibration
    • Analyzer
    • Control Valve
    • Switch
    • Calibration
    • Erection & Commissioning
  • Interview
    • Instrumentation
    • Electrical
    • Electronics
    • Practical
  • Q&A
    • Instrumentation
    • Control System
    • Electrical
    • Electronics
    • Analog Electronics
    • Digital Electronics
    • Power Electronics
    • Microprocessor
  • Request
Search
  • Books
  • Software
  • Projects
  • Process
  • Tools
  • Basics
  • Formula
  • Power Plant
  • Root Cause Analysis
  • Electrical Basics
  • Animation
  • Standards
  • 4-20 mA Course
  • Siemens PLC Course
Reading: PLC Program Examples
Share
Notification Show More
Font ResizerAa
Inst ToolsInst Tools
Font ResizerAa
  • Courses
  • Design
  • PLC
  • Interview
  • Control System
Search
  • Courses
  • Automation
    • PLC
    • Control System
    • Safety System
    • Communication
    • Fire & Gas System
  • Instrumentation
    • Design
    • Pressure
    • Temperature
    • Flow
    • Level
    • Vibration
    • Analyzer
    • Control Valve
    • Switch
    • Calibration
    • Erection & Commissioning
  • Interview
    • Instrumentation
    • Electrical
    • Electronics
    • Practical
  • Q&A
    • Instrumentation
    • Control System
    • Electrical
    • Electronics
    • Analog Electronics
    • Digital Electronics
    • Power Electronics
    • Microprocessor
  • Request
Follow US
All rights reserved. Reproduction in whole or in part without written permission is prohibited.
Inst Tools > Blog > PLC Tutorials > PLC Program Examples

PLC Program Examples

Discuss different PLC program examples for Signal lamp task, Valve operation program and make an output switch off when any of the sensors activated.

Last updated: November 2, 2023 2:28 pm
Editorial Staff
PLC Tutorials
2 Comments
Share
3 Min Read
SHARE

Discuss different PLC program examples for Signal lamp task, Valve operation program and make an output switch off when any of the sensors activated.

Contents
PLC Program Example 1PLC Program Example 2PLC Program Example 3

PLC Program Example 1

A signal lamp is required to be switched on if a pump is running and the pressure is satisfactory, or if the lamp test switch is closed.

For the inputs from the pump and the pressure sensors we have an AND logic situation since both are required if there is to be an output from the lamp. We, however, have an OR logic situation with the test switch in that it is required to give an output of lamp on regardless of whether there is a signal from the AND system.

Also Read: PLC Latching Function Logic

The function block diagram and the ladder diagram are thus of the form shown in Figure 1.37. Note that with the ladder diagram we tell the PLC when it has reached the end of the program by the use of the END or RET instruction,

PLC Program Example for Signal Lamp Task

PLC Program Example 2

As another example, consider a valve which is to be operated to lift a load when a pump is running and either the lift switch is operated or a switch operated indicating that the load has not already been lifted and is at the bottom of its lilt channel.

We have an OR situation for the two switches and an AND situation involving the two switches and the pump. Figure 1.38 shows a possible program.

PLC Program Example for Valves Output

PLC Program Example 3

As another example, consider a system where there has to be no output when any one of four sensors gives an output, otherwise there is to be an output.

One way we could write a program for this is for each sensor to have contacts that are normally closed so there is an output.

When there is an input to the sensor the contacts open and the output stops. We have an AND logic situation. Figure 1.39 shows the functional block diagram and the ladder diagram of a system that might be used.

Also Read: Introduction to PLC Programming

If you liked this article, then please subscribe to our YouTube Channel for PLC and SCADA video tutorials.

You can also follow us on Facebook and Twitter to receive daily updates.

Read Next:

  • What is Emergency Shutdown System (ESD) ?
  • ESDV : How it Works ?
  • Programmable Logic Controller (PLC) Questions
  • Explain Operation of the Lamp Circuit ?
  • Binary Addition
Don't Miss Our Updates
Be the first to get exclusive content straight to your email.
We promise not to spam you. You can unsubscribe at any time.
Invalid email address
You've successfully subscribed !

Continue Reading

PLC Programming for Weight-Based Packaging
LIFO Instruction in PLC
SCADA Multiple Choice Questions
Quiz Program Logic Using PLC Programming
Establish Communication Between Two PLC Via PROFIBUS Protocol
Types of Failures in Industrial Automation Systems
Share This Article
Facebook Whatsapp Whatsapp LinkedIn Copy Link
Share
2 Comments
  • Engr. Shshadat Hossain says:
    February 17, 2016 at 5:59 pm

    Very helpful example.

    Reply
  • Tayo Arogundade says:
    March 30, 2017 at 9:56 am

    Great,this resolved my interview fever/stress…Thank you guys..

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Stay Connected

128.3kFollowersLike
69.1kFollowersFollow
210kSubscribersSubscribe
38kFollowersFollow

Categories

Explore More

Free SCADA Training Course
Siemens S7 300 CPU Status and LED Errors Explanation
Understanding the Scan Cycle of SIEMENS PLC
Pause the Timer PLC Ladder Logic
MOVE Instruction in PLC – What You Need to Know?
Automatic Highway Lights Program using RTC in Omron PLC
Timers using Statement List (STL) PLC Programming
PLC Simulator using Excel

Keep Learning

PID block from the PLC library

How to Configure PID Controller in Various Schneider PLCs?

Ladder Rung with Two Outputs

PLC Multiple Outputs Configuration

Convert Raw Counts to Engineering Units

Raw Counts to Engineering Units : Conversion Formula

Reset Logic for pump Run Hours

PLC Program to Count Running Hours of any Equipment

Redundant system communication cable

What is Interface Module in Siemens PLC?

Top 100 PLC Objective Questions and Answers

Top 100 PLC Objective Questions and Answers

PLC Ladder Logic Chemical Mixing Process

Chemical Mixing Process using PLC

PLC Program for Washing Machine

PLC Program for Washing Machine

Learn More

VFD Interview Questions and Answers

VFD Interview Questions and Answers – Electrical Drives

Split-Range, Auto-Selector Ratio, And Cascade Systems

Split-Range, Auto-Selector, Ratio & Cascade Systems

Business Skills Every Engineer Needs

Business Skills Every Engineer Needs

Measurement and Instrumentation Objective Questions

Measurements & Instrumentation Quiz – Set 9

Control Valve Air to Open type

Control Valve Installation, Maintenance, Disassembly & Reassembly

Ammonia Gas Detector Calibration

Ammonia Gas Detector Working Principle and Calibration

Three Phase Transformer Connections

Three Phase Transformer Connections

Sticker machine with weighing PLC logic

Product Sticker Machine with Weighing PLC Program

Menu

  • About
  • Privacy Policy
  • Copyright

Quick Links

  • Learn PLC
  • Helping Hand
  • Part Time Job

YouTube Subscribe

Follow US
All rights reserved. Reproduction in whole or in part without written permission is prohibited.
Welcome Back!

Sign in to your account

Username or Email Address
Password

Lost your password?