PLC Timers Program

Construct a PLC timing circuit that will output a 0.5 second pulse every two seconds. Write a PLC Timers program application using ladder logic.

Last updated: November 2, 2023 4:54 pm

PLC Tutorials

1 Min Read

Write a PLC Timers Program for the following plc example.

Contents

Construct a PLC timing circuit that will output (using output O:2/0) a 0.5 second pulse every two seconds (i.e. on for 0.5s then off for 2s).

If a switch (using I:1/0) is closed and a 1 second pulse every two seconds if the switch is open.

You can share a detailed explanation of the above PLC ladder logic in the comments section.

Author: Dr. D. J. Jackson

If you liked this article, then please subscribe to our YouTube Channel for PLC and SCADA video tutorials.

You can also follow us on Facebook and Twitter to receive daily updates.

Read Next:

Share This Article

2 Comments

Pradeepsivakumar says:

April 25, 2018 at 11:09 am

Please explain it sir. I cannot understand clear.

And thanks for documentation sir.

Reply
- Romeo Batomen says:
  
  April 15, 2023 at 8:25 am
  
  Explained I want to know very good and pratique PLC PROGRAMMING
  
  Reply