Ultrasonic flow meters operate using the transit-time differential method. The Transit-time differential measurement is based on a simple physical fact.
Imagine two canoes crossing a river on the same diagonal line, one with the flow and the other against the flow. The canoe moving with the flow needs much less time to reach the opposite bank.
Ultrasonic waves behave exactly the same way. A sound wave traveling in the direction of the flow of the product is propagated at a faster rate than one traveling against the flow (vAB > vBA).
Transit times tAB and tBA are measured continuously. The difference (tBA – tAB) in time traveled by the two ultrasonic waves is directly proportional to the mean flow velocity (vm).
Where,
If you liked this article, then please subscribe to our YouTube Channel for Instrumentation, Electrical, PLC, and SCADA video tutorials.
You can also follow us on Facebook and Twitter to receive daily updates.
Read Next:
Learn an example PLC program to control a pump based on level sensors using ladder…
In the PLC timer application for security camera recording, when motion is detected then camera…
In this example, we will learn batch mixing with PLC ladder logic program using timer…
This PLC example on manufacturing line assembly is an intermediate-level PLC program prepared for the…
In this article, you will learn the PLC programming example with pushbutton and motor control…
This article teaches how to convert Boolean logic to PLC programming ladder logic with the…
View Comments
Pls, hindi version available ?
Hi, Open Any Article > In Right Side bottom, you can find language translate option, select your required language.