Today we are going to discuss about Relay Noise reduction method. Sometimes we observe more noise is generated by relay output switching.
In such case, a Noise filter must be connected to the load side or other appropriate countermeasures must be provided external to the PLC.
Countermeasures are not required if the frequency of load switching for the whole system with the PLC included is less than 5 times per minute means required after more than 5 times per minute.
When switching an inductive load,connect an surge protector, diodes,etc in parallel with the load or contact as shown below:
When switching a load with a high inrush current such as an incandescent lamp, Suppress the inrush current as shown below:
If you liked this article, then please subscribe to our YouTube Channel for PLC and SCADA video tutorials.
You can also follow us on Facebook and Twitter to receive daily updates.
Read Next:
In this article, we are going to discuss about shutter door control using induction motor…
Electrical Drives control the motion of electric motors. Motion control is required in industrial and…
PLC ladder logic design to control 3 motors with toggle switch and explain the program…
VFD simulator download: Master the online tool from the Yaskawa V1000 & programming software for…
The conveyor sorting machine is widely used in the packing industries using the PLC program…
Learn the example of flip-flop PLC program for lamps application using the ladder logic to…
