Electrical Standards
Electrical calibration equipment – used to calibrate instruments measuring voltage, current, and resistance – must be periodically calibrated against higher-tier
H1 FF Device Configuration and Commissioning
Fieldbus devices require far more attention in their initial setup and commissioning than their analog counterparts. Unlike an analog transmitter,
Practical Calibration Standards
As previously defined, calibration refers to the checking and adjustment of an instrument so that its output faithfully corresponds to
How to Stop Cyber Attacks on PLC or DCS?
As control system professionals, it is in our interest to ensure our measurement and control systems are secure from unauthorized
Unbonded Strain Gauge Principle
These strain gauges are not directly bonded onto the surface of the structure under study. Hence they are termed as unbounded strain gauges. Description of the
Semi Conductor or Piezo Resistive Strain Gauge Principle
These gauges are directly bonded (that is pasted) on the surface of the structure under study. Hence they are termed
Metal Foil Strain Gauge Principle
These gauges are directly bonded (that is pasted) on the surface of the structure under study. Hence they are termed
Fine Wire Strain Gauge Principle
These gauges are directly bonded (that is pasted) on the surface of the structure under study. Hence they are termed
Sling Psychrometer Principle
Sling Psychrometer is used to measure both the dry bulb and wet bulb temperatures at time. These temperatures are a
Humidity Sensing Absorption Hydrometer Principle
A change in resistance with change in humidity is taken as a measure of humidity. This is type of Electrical