Determine the pressure at each port of the DP transmitter during an instrument technician’s step-by-step valve isolation procedure.
Assume the process fluid sensed by the transmitter is a gas and not a liquid.
Based on the process pressures shown, identify the direction of process gas through this heat exchanger.
Also, identify what the technician needs to tell the process operator(s) prior to isolating the transmitter from this process.
Share your answers with us through the below comments section.
Read Next:
Credits: Tony R. Kuphaldt
Electrical Drives control the motion of electric motors. Motion control is required in industrial and…
PLC ladder logic design to control 3 motors with toggle switch and explain the program…
VFD simulator download: Master the online tool from the Yaskawa V1000 & programming software for…
The conveyor sorting machine is widely used in the packing industries using the PLC program…
Learn the example of flip-flop PLC program for lamps application using the ladder logic to…
In this article, you will learn the STAR DELTA programming using PLC controller to start…