Multiple Choice Questions

UV Visible Spectrometers Questions and Answers

UV Visible Spectrometers Questions and Answers

1. Beer Lambert’s law gives the relation between which of the following?

a) Reflected radiation and concentration
b) Scattered radiation and concentration
c) Energy absorption and concentration
d) Energy absorption and reflected radiation

Answer: c

Explanation: Beer Lambert’s law gives the relation between Energy absorption and Concentration. It was proposed by Beer and Lambert.

2. In which of the following ways, absorption is related to transmittance?

a) Absorption is the logarithm of transmittance
b) Absorption is the reciprocal of transmittance
c) Absorption is the negative logarithm of transmittance
d) Absorption is a multiple of transmittance

Answer: c

Explanation: Transmittance is the ratio of the radiant power transmitted by a sample to the radiant power incident on the sample. Absorption is the negative logarithm of transmittance.

3. Which of the following is not a limitation of Beer Lambert’s law, which gives the relation between absorption, thickness, and concentration?

a) Concentration must be lower
b) Radiation must have higher bandwidth
c) Radiation source must be monochromatic
d) Does not consider factors other than thickness and concentration that affect absorbance

Answer: b

Explanation: The law is derived assuming that the radiation is monochromatic. So, if bandwidth increases it will create deviation.

4. Beer’s law states that the intensity of light decreases with respect to ___________

a) Concentration
b) Distance
c) Composition
d) Volume

Answer: a

Explanation: Beer’s law states that the intensity of light decreases with the concentration of the medium. It was stated by Beer.

5. Lambert’s law states that the intensity of light decreases with respect to __________

a) Concentration
b) Distance
c) Composition
d) Volume

Answer: b

Explanation: Lambert’s law states that the intensity of light decreases with respect to the concentration of the medium. It was stated by Lambert.

6. The representation of Beer Lambert’s law is given as A = abc. If ‘b’ represents distance, ‘c’ represents concentration and ‘A’ represents absorption, what does ‘a’ represent?

a) Intensity
b) Transmittance
c) Absorptivity
d) Admittance

Answer: c

Explanation: ‘a’ represents the absorption constant. It is also known as absorptivity.

7. Which of the following is not true about Absorption spectroscopy?

a) It involves transmission
b) Scattering is kept minimum
c) Reflection is kept maximum
d) Intensity of radiation leaving the substance is an indication of concentration

Answer: c

Explanation: In Absorption spectroscopy, reflection must also be kept minimum along with scattering. Amount of absorption depends on the number of molecules in the material.

8. Transmittance is given as T = P/Po. If Po is the power incident on the sample, what does P represent?

a) Radiant power transmitted by the sample
b) Radiant power absorbed by the sample
c) Sum of powers absorbed and scattered
d) Sum of powers transmitted and reflected

Answer: a

Explanation: P represents radiant power transmitted by the sample. Transmittance is the ratio of radiant power transmitted by the sample to the radiant power that is incident on it.

9. What is the unit of absorbance which can be derived from Beer Lambert’s law?

a) L mol-1 cm-1
b) L gm-1 cm-1
c) Cm
d) No unit

Answer: d

Explanation: Absorbance has no unit. The units of absorptivity, distance, and concentration cancel each other. Hence, absorption has no unit.

10. What is the unit of molar absorptivity or absorptivity which is used to determine absorbance A in Beer Lambert’s formula?

a) L mol-1 cm-1
b) L gm-1 cm-1
c) Cm
d) No unit

Answer: a

Explanation: The unit of absorptivity is L mol-1 cm-1. If the concentration is represented as gm per litre it becomes L gm-1 cm-1.

You've successfully subscribed !
Share

Recent Articles

Example of Flip-Flop PLC Program for Lamps Application
  • PLC Tutorials

Example of Flip-Flop PLC Program for Lamps Application

Learn the example of flip-flop PLC program for lamps application using the ladder logic to…

4 days ago
  • PLC Tutorials

STAR DELTA Programming using PLC Controller

In this article, you will learn the STAR DELTA programming using PLC controller to start…

4 days ago
  • Instrumentation Design

Single and Three Phase Immersion Electrical Heaters Wiring Circuits

Lube oil consoles of rotary equipment packages in industrial process plants are usually equipped with…

2 days ago
  • Instrumentation Design

Immersion Heaters in Lube Oil Consoles

Rotating equipment packages such as pumps, compressors, turbines need the lube oil consoles for their…

4 days ago
  • PLC Tutorials

How to Blink Lights in Ladder Logic?

This article explains how to blink lights in ladder logic with a detailed explanation video…

3 weeks ago
  • PLC Tutorials

From Boolean Algebra to PLC Logic

In this article, a simple example will teach you the conversion from Boolean algebra to…

1 month ago