Omron PLC online training course helps you to learn basic ladder logic programming using the CX-programmer software.
Learn PLC programming in Hindi online for beginners with our free Omron training course using CX programmer software.
Determine the necessary PLC switch actuation status (i.e. low versus high process stimulus) to turn the yellow lamp on.
Sketch a Ladder Diagram program for this PLC to energize the lamp if the following input conditions are met.
Suppose we have a PLC connected to three pushbutton switches. Sketch a Ladder Diagram program for program example.
Suppose we have an Allen-Bradley MicroLogix 1000 PLC and two pressure switches we need to connect to it.
Question & Answer - A PLC has been programming to control the starting and stopping of a three-phase electric motor.
A PLC has been programming to control the starting and stopping of a three-phase electric motor.
Identify the problem(s) in this PLC program, and modify it so that it will work as it should.
We have a problem in one of the PLC Permissive Inputs that there is a programming mistake, do the troubleshooting.
