This video shows us the relation between Programmable Logic Controller (PLC), motor control center (MCC), Local Control Panel (LCP) for controlling a Pump or Motor.
MCC : Motor Control Center or Substation where motor will be powered.
PLC/DCS : Control System, where Motor can be controlled as per logic (Auto) or as per operator action (Manual).
LCP : Local Control Panel which is installed in the field, near motor in which start, stop push buttons are available
If you liked this article, then please subscribe to our YouTube Channel for PLC and SCADA video tutorials.
You can also follow us on Facebook and Twitter to receive daily updates.
Read Next:
Learn an example PLC program to control a pump based on level sensors using ladder…
In the PLC timer application for security camera recording, when motion is detected then camera…
In this example, we will learn batch mixing with PLC ladder logic program using timer…
This PLC example on manufacturing line assembly is an intermediate-level PLC program prepared for the…
In this article, you will learn the PLC programming example with pushbutton and motor control…
This article teaches how to convert Boolean logic to PLC programming ladder logic with the…
View Comments
Nicely Done. Great Animation for beginners and worth sharing video.
Please sir I need knowledge in instrumentation, please update me by sending article into my email for study
Hi, You can subscribe for Daily email updates : CLICK HERE
Hi, Peter Can you also please share with me instrumentation training courses.