Filters Questions and Answers – Part 2

An LC filter will have ripple factor value___________ (For the same value of L & C)

The current ripple factor (CRF) is the ratio of

In the below given configuration, L is connected as a filter across the R load. The average ammeter current is

C filters are suitable for ___________ load resistances and L filters are suitable for _____________ load resistances.

An inductor filter connected in series with a resistive load provides a

In a single-phase full wave rectifier ___________ order harmonics are the most dominant

In case of an L filter, the ripple current increases with

In case of a C filter, if R (load resistance) is increased

When a certain type of filter is connected across the R load, of a full wave bridge diode biased rectifier the following output current waveform is obtained. The filter connected is most likely a

A diode rectifier with a C filter will have average output voltage _______ than that obtained by a rectifier without the C filter.