Choppers Objective Questions – 4

For the step-down chopper shown in the figure below, dc source voltage = 230 V. Find the power delivered to the load of R = 10 Ω. Duty cycle = 40 %. Take voltage drop at the switch to be 2 V.

A step down chopper has Vs = 230 V and R = 10 Ω. For a duty cycle of 0.4, the power taken by the chopper is 2097 Watts. Find the chopper efficiency. Take the voltage drop across the chopper switch as 2 V.

For the step-down chopper shown in the figure below, dc source voltage = 230 V. Find the power input to the chopper If load of R = 10 Ω is connected. Duty cycle = 40 %.

A step down chopper has input dc voltage of 220 V and R = 10 Ω in series with L = 65 mH. If the load current varies linearly between 11 A and 17 A, then find the duty cycle α.

For a step-up/step-down chopper, if the duty cycle > 0.5 then

The below given chopper circuit is that of a

For a step-down chopper shown in the figure below, dc source voltage = 230 V and the voltage drop across the chopper = 2 V. Find the value of average output voltage for a duty cycle of 0.4.

For a step-up/step-down chopper, if α (duty cycle) = 0.5 then

For the step-down chopper shown in the figure below, dc source voltage = 230 V and the voltage drop across the chopper = 2 V. Find the value of rms output voltage for a duty cycle of 0.4.

The expression for a step-up/step-down chopper with α as the duty cycle and Vs as the dc input voltage is