A PLC has been programming to control the starting and stopping of a three-phase electric motor.
Shown here is a partial wiring diagram and offline PLC program display for the system:
Identify the problem(s) in this PLC program, and modify it so that it will work as it should.
The PB_stop and OL_switch instructions in the second rung of the PLC program need to be connected in parallel with each other rather than in series.
Being NC real-world switches and NC contact instructions, each one will “color” when the motor is supposed to stop (i.e. the PB_stop instruction colors when anyone presses the Stop pushbutton, and the OL_switch instruction colors when the motor overheats).
Right now, programming in series with each other, both conditions would have to take place in order to stop the motor!
To make the motor stop if either condition occurs, we need these two instructions to be programmed in a logical “OR” fashion, and that necessitates a parallel connection between the two contact instructions.
If you liked this article, then please subscribe to our YouTube Channel for PLC and SCADA video tutorials.
You can also follow us on Facebook and Twitter to receive daily updates.
More PLC Questions :
Learn an example PLC program to control a pump based on level sensors using ladder…
In the PLC timer application for security camera recording, when motion is detected then camera…
In this example, we will learn batch mixing with PLC ladder logic program using timer…
This PLC example on manufacturing line assembly is an intermediate-level PLC program prepared for the…
In this article, you will learn the PLC programming example with pushbutton and motor control…
This article teaches how to convert Boolean logic to PLC programming ladder logic with the…
View Comments
It seems to be wrong for this answer.