Open-channel flow meter is weir, which is nothing more than a dam obstructing passage of liquid through channel. Study Weirs…
An example of a variable area flow meter is the rotameter, which uses float as a flow indicator, suspended in…
What is Flow Meter K-factor ? The K-Factor expressed in pulses per unit volume, used to calculate the volumetric flow…
Orifice Drain hole is required in gas flow service where liquid entrapment may occur. Orifice Vent hole is required in…
Flow measurement accuracy of any flow meter becomes compromised is incorrect installation, and pressure-based flow meters are no exception to…
Different types of Orifice plate Taps are Flange Taps, Corner Taps, Vena contracta taps. This article provides information on Orifice…
Orifice plates are typically sandwiched between two flanges of a pipe joint, allowing for easy installation for fluid to flow…
Differential pressure developed by a venturi, orifice plate, pitot tube, or any other flow element is proportional to the square-root…
Measurements of mass flow are preferred over measurements of volumetric flow in process applications where mass balance is important.
Volumetric Flow Calculations use differential pressure produced by any flow element tube with any particular fluid density at a specified…
