🔥 Need PLC Experts? → Start Consultation 🚀 Industrial Automation Support

Differential Pressure (DP) Level transmitter Installed Above Tapping Point

Open Tank Level Measurement (Single Seal Application) Transmitter installed above Tapping Point This calculation used for open tank level measurement with transmitter installed above tapping point Your browser does not…

Hydrostatic Pressure Measurement Questions

Hydrostatic Pressure Measurement Question : Calculate the hydrostatic pressure generated at the bottom of this vessel (in units of PSI) when it is completely filled with water: Now calculate the…

Determine LRV and URV settings for the Level Transmitter

Determine LRV and URV settings for the Level Transmitter Question : Determine the LRV and URV settings for the water seal drum level transmitter (LT-21), assuming the LRV point is…

Displacer Level Transmitter 5-point Calibration

Displacer Level Transmitter 5-point calibration Question : Determine a basic 5-point (0%, 25%, 50%, 75%, and 100%) calibration table for the displacer level transmitter in this scenario: The cylindrical displacer…

Flow Transmitter Readings mismatch with DCS

A “smart” DP transmitter and orifice plate were recently installed to measure flow through a pipe. The orifice plate range is 0 to 150 inches WC at 0 to 1000…

DP Transmitter Calibration Errors

A “smart” DP transmitter with built-in square root characterization is used to measure flow through a pipe. The orifice plate range is 0 to 150 inches WC at 0 to…

DP Transmitter Error Calculations

A “smart” DP transmitter with built-in square root characterization is used to measure flow through a pipe. The orifice plate range is 0 to 125 inches WC at 0 to…

Smart DP Transmitter Flow Meter Calculations

A Smart DP transmitter with built-in square root characterization is used to measure flow through a pipe. The orifice plate range is 0 to 125 inches WC at 0 to…

Pitot Tube Flowmeter Calculations

A Pitot tube measuring the flow of glycerin (78.6 lb/ft3 ) produces a differential pressure of 35 inches W.C. at a mass flow rate of 450 pounds per minute. Calculate…

Electronics & Instrumentation Engineering Interview Questions For Freshers

Read the complete list of Electronics & Instrumentation Engineering Interview Questions and Answers For Freshers to attend the interview. Electronics & Instrumentation Questions Square Root Calculation For DP Flow Transmitter?…