Electrical Machines Questions and Answers : Torque in DC Machines
0%
For a universal motor, the rated supply current is 10A giving a rated torque of 100 Nm. If a current of 5A is applied, what will be generated torque vary to?
Correct!
Wrong!

Choose the correct representation, which depict a nonzero torque in the armature.
Correct!
Wrong!

The simple rotating loop between pole faces connected to a battery and resistor through a switch, the specifications of this machine are radius = 0.5m, length 1m, resistance = 0.3 ohms and magnitude strength = 0.25T is supplied with 120V. Suddenly the switch is closed at t=0, what is observed in the circuit?
Correct!
Wrong!

12. Pulsating torque frequency in universal motor
Correct!
Wrong!

DC Motor torque depends on
Correct!
Wrong!

If the torque induced is zero in the dc machine, it can be said that
Correct!
Wrong!

The simple rotating loop between pole faces connected to a battery and resistor through a switch, the specifications of this machine are radius = 0.5m, length 1m, resistance = 0.3 ohms and magnitude strength = 0.25T is supplied with 120V. What is the steady state angular velocity at noload?
Correct!
Wrong!

If the torque is in the direction of rotation, the DC machine acts as
Correct!
Wrong!

What is the principle of torque production in a dc machine?
Correct!
Wrong!

The velocity of the dc machine at the final state is
Correct!
Wrong!

The torque induced beyond the pole shoes in the DC machine is
Correct!
Wrong!

The cogging torque is absent in the permanent magnet dc machine is due to
Correct!
Wrong!

The simple rotating loop between pole faces connected to a battery and resistor through a switch, the specifications of this machine are radius = 0.5m, length 1m, resistance = 0.3 ohms and magnitude strength = 0.25T is supplied with 120V. What will be the magnitude of the following current at t=0+?
Correct!
Wrong!

The variation of current in the armature can be best expressed by which of the below curves?
Correct!
Wrong!
