Animation Credits : KANSAI Automation
Tilt Level Switch detects the presence or absence of material at the elevation of its probe. The arriving material pushes the lower end of the hanging probe to one side. An internal drop of liquid acts as a tilt sensor and signals when the probe moves to an angle of 17° (or any other angle specified by vendor) away from vertical This tilt signal is handled in accordance with the programmed setup. The output relay energizes if the probe remains vertical for the preset time period.
Also Read: Tilt Switch Working Principle
Learn an example PLC program to control a pump based on level sensors using ladder…
In the PLC timer application for security camera recording, when motion is detected then camera…
In this example, we will learn batch mixing with PLC ladder logic program using timer…
This PLC example on manufacturing line assembly is an intermediate-level PLC program prepared for the…
In this article, you will learn the PLC programming example with pushbutton and motor control…
This article teaches how to convert Boolean logic to PLC programming ladder logic with the…
