Inst Tools

Inst Tools
Home » plc ladder logic for motor control

Tag : plc ladder logic for motor control

PLC Program for Automatic Liquid Mixing Application

S Bharadwaj Reddy
This is PLC Program for Automatic Liquid mixing Application. Problem Description:- In many industries, there are lots of mixing system are used for solutions mixing. Some plants use complete automation

PLC Program for Sequential Motor Control

S Bharadwaj Reddy
This is PLC Program for Sequential Motor Operating System. Problem Description In many industries, there are lots of motors are used. Sometimes we need to start more than one motor

PLC Program for Two Way Switch Logic

S Bharadwaj Reddy
This is PLC Program for Two ways switch logic for staircase light in house Problem Description:- In duplex type house there are ground floor and first floor and sometimes second

PLC Program for Automatic Lamp Control in Storage Facility

S Bharadwaj Reddy
This is PLC Program for Automatic lamp Control in Godown (Storage Facility). Problem Description:- In old process, when the person enters in the godown (Storage facility), he/she presses the switch

PLC Program for Automatic Parameter Initialization when Power UP

S Bharadwaj Reddy
This is PLC Program for Automatic Parameter initialization when power up. Problem Description:- In many applications it is necessary to initialize some data when machine is powered up. Sometimes due

PLC Program for Latching and unlatching Circuit

S Bharadwaj Reddy
This is PLC Program for Latching and unlatched circuit for output. Problem Description:- In some conveying system operator fills tank manually by operation water pump manually. In this situation operator

PLC Ladder Logic for 3 Phase Asynchronous Motor Control

S Bharadwaj Reddy
This is PLC Program for Forward and Reverse control for 3 Phase Asynchronous Motor. Problem Description There are lots of motors and conveyors used in industries for different purposes. In

PLC Program for Conditional Control Logic

S Bharadwaj Reddy
This is PLC Program for Conditional Logic Circuit Problem Description In Industry or plants, there are lots of gear box systems used for different machines/motors. For smooth operation of gear

PLC Program for Analog Input Sampling

S Bharadwaj Reddy
Design an efficient PLC ladder logic program that samples analog input (I:1.0) at the rate of 2Hz and outputs the average value to analog output O:1.0 once every two seconds. PLC

PLC Program for Conveyor System

S Bharadwaj Reddy
Write a PLC Program for the following task : Assume there are sixteen stations along a conveyor system. The stations are numbered from 0-15 with station zero being the first

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

WordPress Image Lightbox