Single-Phase Full Wave AC-DC Converter Objective Questions
Power Electronics Objective Questions & Answers
0%
A single-phase full converter with B-2 type of connection has a continuous load current waveform. The thyristor pairs T3, T4 is triggered at ωt =
Correct!
Wrong!
-
The PIV for each diode in a single-phase, full converter with B-2 type of controlled rectifier is Consider supply voltage as Vs = Vm sinωt.
Correct!
Wrong!
-
With respect to the below given circuit, from ωt = 0 to α, ____ thyristor(s) block the forward voltage
Correct!
Wrong!
-
For the below given circuit, when the devices T1 and T2 are conducting from ωt = α till they are naturally commutated at π voltage across the other two pair of devices is
Correct!
Wrong!
-
For the below shown circuit has dis-continuous load current waveform. Each thyristor pair conducts for
Correct!
Wrong!
-
For the below given circuit,
Correct!
Wrong!
-
For the below shown circuit with continuous load current. Each thyristor pair conducts for
Correct!
Wrong!
-
With respect to the below given circuit, from ωt = 0 to α,
Correct!
Wrong!
-
A single-phase full converter B-2 type connection has a RLE type of motor load connected. The minimum requirement to turn-on the device is
Correct!
Wrong!
-
For the below given circuit
Correct!
Wrong!
-
Single Phase FW AC-DC-2
I got %%score%% of %%total%% right
