PLC Tutorials

Parallel Operation of Alternators

Requirements of parallel operation of alternators:

The alternators which are to be operated in parallel should meet the following requirements so as to make the operation successful. Requirements are:

  • Two alternators or synchronous generators which are to be operated in parallel should have same output voltage rating
  • The rated speed of the machines which are operating in parallel should be such as to give the same frequency (f is equal to (PxN)/120)
  • The alternators should be of the same type so as to generate voltages of the same waveform. Generators operating can have different power rating (KVA rating)
  • The prime movers of the alternators should have same speed load characteristics, the nature of characteristics should be drooping so that load on the generator is proportional to output rating of the alternators
  • Without reactancce the alternators will not develop generating power and parallel operation would not be possible. Hence the alternators should have reactances in armature circuits, otherwise they will not operate in parallel
You've successfully subscribed !
Share

Recent Articles

From Boolean Algebra to PLC Logic
  • PLC Tutorials

From Boolean Algebra to PLC Logic

In this article, a simple example will teach you the conversion from Boolean algebra to…

1 month ago
  • PLC Tutorials

PLC Cooking Timer Example for Kitchen Automation

In this article, you will learn the PLC cooking timer example for kitchen automation using…

3 weeks ago
  • PLC Tutorials

Example PLC Program to Control a Pump based on Level Sensors

Learn an example PLC program to control a pump based on level sensors using ladder…

3 weeks ago
  • PLC Tutorials

PLC Timer Application in Security Camera Recording

In the PLC timer application for security camera recording, when motion is detected then camera…

3 weeks ago
  • PLC Tutorials

Batch Mixing with PLC Ladder Logic Program

In this example, we will learn batch mixing with PLC ladder logic program using timer…

2 weeks ago
  • PLC Tutorials

PLC Example on Manufacturing Line Assembly

This PLC example on manufacturing line assembly is an intermediate-level PLC program prepared for the…

3 weeks ago