The electromagnetic wave measuring process allows for universal use even when the media changes.
The electromagnetic wave penetrates the medium and, depending on the respective relative permittivity,
A phase shift occurs which is then detected and calculates the level.
Conductive probes detect the resistance of the fill goods when the goods cover their electrodes. A small AC current is generated which is evaluated in the electronics unit and converted into switching commands. The switching signal is determined by the length and installation position of the probe and its sensitivity setting.
The probe rods are optionally made of stainless steel or coated in order to guarantee their insensitivity to foam and adhesions. For changing media with widely differing degrees of conductivity, the sensitivity of the probe can be switched over via the control cable.
Source : Khrone
In this article, you will learn the PLC cooking timer example for kitchen automation using…
Learn an example PLC program to control a pump based on level sensors using ladder…
In the PLC timer application for security camera recording, when motion is detected then camera…
In this example, we will learn batch mixing with PLC ladder logic program using timer…
This PLC example on manufacturing line assembly is an intermediate-level PLC program prepared for the…
In this article, you will learn the PLC programming example with pushbutton and motor control…
