Electric Circuits Objective Questions
0%
Which part of magnetic path requires largest mmf?
Correct!
Wrong!

The unit of electric field intensity is
Correct!
Wrong!

The time required for a pulse to change from 10 % to 90 % of its maximum value is known as
Correct!
Wrong!

An equipotential surface is one which has all points at _____________ potential.
Correct!
Wrong!

The electric field at a point situated at a distance d from straight charged conductor is
Correct!
Wrong!

A conductor of length l meters moves at right angles to a uniform magnetic field of flux density B = 1.5 T. if the velocity of revolution of the conductor is 50 ms1 then induced e.m.f. in the conductor is
Correct!
Wrong!

If c_{1} = 8 Î¼F, c_{2} = 4 Î¼F, c_{3} = 7 Î¼F c_{1}, c_{2} are in series with c_{3}; effective capacitance will be
Correct!
Wrong!

In an AC circuit, containing pure inductance, the voltage applied is 120 V, 50 Hz while the current is 10 A. Find the value of inductance.
Correct!
Wrong!

The stray line of magnetic flux is defined as
Correct!
Wrong!

Under resonance condition the power factor of a system is
Correct!
Wrong!

The presence of an uncharged conductor near a charged one increases the
Correct!
Wrong!

A 2 m long conductor, carries a current of 50 A at a magnetic field of 100 Ã— 10 âˆ’ 3 T. The force on the conductor is
Correct!
Wrong!

A capacitor having a mica dielectric Îµ_{R} = 6, a plate area of a 10 inches2 and a separation 0.01 inch. Find the value of C
Correct!
Wrong!

Which field is associated with the capacitor?
Correct!
Wrong!

A parallel plate capacitor contain there dielectric layers of 1, 2 and 3 respectively and thickness of dielectric layers are 0.2 mm, 0.3 mm and 0.4 mm respectively. If area of plate is 20 cm2. What is the value of capacitance?
Correct!
Wrong!

Emf induced in a coil rotating in a uniform magnetic field will be maximum when the
Correct!
Wrong!

Fall time is the time required for a pulse to decrease from 90 to ________% if its maximum values
Correct!
Wrong!

The coils having self inductor of 10 mH and 15 mH have an effective inductor of 40 mH , when connected in series aiding. What will be the equivalent inductor if we connect them in series opposing
Correct!
Wrong!

A positive and a negative charged are initially 50 mm apart. When they are moved close together so that they are now only 10 mm apart, the force between them will be
Correct!
Wrong!

An electric field can deflect
Correct!
Wrong!

Which of following is the unit of magnetic flux density?
Correct!
Wrong!

The ratio of intensity of magnetisation to the magnetising force is known as
Correct!
Wrong!

When a dielectric is placed in an electric field the field strength
Correct!
Wrong!

Reactive power drawn by a pure resistor is
Correct!
Wrong!

A parallel plate capacitor with air as dielectric, force between plate is F. If capacitor is now immersed water of dielectric Îµr, force between plate will be â€“
Correct!
Wrong!

A rectangular magnet of magnetic moment M is cut into two places of same length. The magnetic moment of each place will be
Correct!
Wrong!

A coil with negligible resistance has 50 V across it with 10 mA. The inductive reactance is
Correct!
Wrong!

For electrics flux is proportional to
Correct!
Wrong!

Two point charges of 4Î¼C are placed at a distance of 3 cm apart from each other in free space. Force acting on two charges will be
Correct!
Wrong!

An electrical motor has rating of 10 MVA at 0.8 lag, represented as series RL circuit at a 50 MVA base. Find the impedance value?
Correct!
Wrong!

Similar Articles:
 Top 100 PLC Objective Questions and Answers
 Power Electronics Objective Questions
 Objective Questions on Valves
 100 PLC Quiz Questions : True or False
 Pneumatic Systems Objective Questions
 PLC Programming Questions & Answers – 1
 PLC Multiple Choice Questions
 MCQ on Measurement and Instrumentation
 R RC Firing Circuits Disadvantages
 Programmable Logic Controller Practice Tests