Electric Bell : How it works:
1. The button at the top (K) is closed.
2. Current flows through the solenoid (E). This produces a magnetic field.
3. This pulls the magnet (A) toward the solenoid. This bar hits the bell, creating a dinging noise.
4. When A goes up, it pulls away from T and hits B, the bell. This movement disconnects A from T and disconnects the circuit (the current no longer can flow in a full circle.)
5. Since the circuit is disconnected, the current flowing through the solenoid is stopped, and the magnetic field retracts.
6. Since the magnetic field is no longer there, A is no longer attracted to the solenoid, so A falls back down.
7. When A falls, it reconnects to T, and the circuit is complete again. The process restarts with steps 2-7 until K is no longer pressed.
The conveyor sorting machine is widely used in the packing industries using the PLC program…
Learn the example of flip-flop PLC program for lamps application using the ladder logic to…
In this article, you will learn the STAR DELTA programming using PLC controller to start…
Lube oil consoles of rotary equipment packages in industrial process plants are usually equipped with…
Rotating equipment packages such as pumps, compressors, turbines need the lube oil consoles for their…
This article explains how to blink lights in ladder logic with a detailed explanation video…