In open tank applications, the level can be measured with either gauge or differential pressure (DP) transmitters, using the assumption that P = LS. If specific gravity needs to be measured, then the equation can be modified to S = L/P. For this to work, the level must stay constant so that any pressure changes reflect the specific gravity change. This works well in a tank where there is no change in level, such as when it is desirable to measure a density change as a way of monitoring a reaction, or as the fluid’s temperature changes.This calculation tool only used for constant level application.
Density Measurement using DP transmitter for open tank for constant level application |
The formulas for calculating the tranmitter LRV and URV are;
HP Side/LRV/4ma = LSmin
LP Side/URV/20ma = LSmax
In this article, we are going to discuss about shutter door control using induction motor…
Electrical Drives control the motion of electric motors. Motion control is required in industrial and…
PLC ladder logic design to control 3 motors with toggle switch and explain the program…
VFD simulator download: Master the online tool from the Yaskawa V1000 & programming software for…
The conveyor sorting machine is widely used in the packing industries using the PLC program…
Learn the example of flip-flop PLC program for lamps application using the ladder logic to…