Industrial Control Systems - Instrumentation Tools

Foundation Fieldbus – Advantages, Limitations, Architecture

Study about the Foundation Fieldbus Advantages, Limitations, Architecture, standard specifications, and types of FF devices.

Learn the stroke checking procedure for GCV, SRV, IGV, and LFBV using the Mark V gas turbine control system.

Learn the basic commissioning steps of the distributed control system (DCS) followed during the new plant installation.

Determine the control loop faults by careful observation of the PID controller’s faceplate display (PV, SP, and Output values).

Nest loading is the overall footprint of all the inputs and outputs of the control system (PLC, DCS, etc).

The components location, wiring, and termination in the Interposing Relay Panel (IRP) shall be as per the approved system drawing.

Test your knowledge with the 35 quiz questions and answers on the DCS (Distributed Control System) in the industrial automation systems.

Learn basic factors for the UPS selection of a control system to provide regulated and uninterrupted power supply within tolerance.

Learn how to do instrument loop test requirements and the operation procedures for the different transmitters and switch.

Learn the procedure for inspection and testing of fiber optic cable drum using OTDR (Optical Time-domain Reflectometer) & Continuity Test.