Orifice Flow Meters: Detailed Specifications
Orifice metering is the standard measurement choice for flow. Here we shall see detailed specifications of orifice type of flow meter.
What is Cable Schedule and Junction Box Schedule?
Cable and Junction Box schedules are deliverables prepared by instrumentation and control design engineers in EPC or EPCM Companies. In this article, we shall learn about the same. Inputs Required…
How much Pressure will Remote Seal Pressure Transmitter Indicate?
A pressure transmitter with a remote seal measures the pressure of a gas inside a process vessel. A pressure gauge directly attached to the vessel registers 19.3 PSI. The transmitter…
Three-valve Manifold on Remote Seal DP Transmitter
Explain why no one in their right mind would ever, ever, install a three-valve manifold on a DP transmitter with remote seals: Remote Seal DP Transmitter Answer: If the equalizing…
Importance of Temperature in Remote Seal Pressure Transmitter
Why is temperature an important factor in pressure transmitters equipped with remote seals (sometimes called “chemical” seals)? Specifically, what temperature condition(s) could cause a differential pressure instrument with remote seals…
Instrumentation and Control (I&C) General Specifications
General Specification is a deliverable prepared by Instrumentation and Control (I&C) Engineers to define minimum requirements for designing Instrumentation in EPC or EPCM Companies. For each parameter (like Flow, Temperature,…
Instrumentation and Control (I&C) Design
The purpose of Instrumentation and Control (I&C) Design document is to cover the project-specific technical requirements which are to be followed throw-out the Feed or Detailed Engineering Phase while preparation…
Control Valve Accessories – Principle, Purpose, Advantages
A control valve is the most commonly used to regulate fluid flow in the process. The international society of automation defines the control valve as a power-operated device that operates…
What is the Purpose of Chemical Seals Pressure Transmitter?
Some pressure instruments come equipped with chemical seals consisting of diaphragm units connected to the instrument with small-bore “capillary” tubing filled with a liquid such as silicone oil: Pneumatic Differential…
Double Block and Bleed Valves Opening or Closing Sequence
On processes where the fluid in question is especially dangerous, “double block and bleed” valve manifolds are often used to isolate pressure measuring instruments (like pressure gauge, pressure transmitters, etc)…
