How to Apply on Online JOB Portal Website?
We cannot label 1 of the job boards as the best or I can say we do not have a job board which just offers a job opportunity & you…
Design and Accessories Required for Online Testing of Solenoid Valve
There are two fails which are widely known in safety system. Nuisance Fail The first one is called a nuisance fail which does not put the plant system in danger.…
How to Communicate with Excel from Intouch SCADA?
You know why SCADA is being used in industries. The main purposes are, For Data AcquisitionGraphical Control.Easy to interpret with data while being controlling field instruments from the SCADA. There…
How to Calculate Transmitter Performance and Calibration Frequency?
The overall performance of the transmitter is defined by the Total Probable Error (TPE). TPE is the accuracy of the instrument in installed/actual conditions. Transmitter Calibration Frequency TPE is made…
Instrument Cable Voltage Drop
Sizing of instrument cable should be performed to ensure that instrument device such as solenoid valve and its cabling works properly. There are two factors that should be checked i.e.…
Valve Safety Factor
During designing an actuated valve, instrument engineer shall concern to valve safety factor which is a ratio between “torque produced by an actuator” to “torque required by a valve to actuate…
How to Choose a Brass Cable Gland Manufacturer?
Cable gland is a device used to connect and secure the electrical cables attached to major equipment. Among all other metals, Brass is considered the conventional metal for the manufacturing…
Orifice Flowmeter Rangeability
The orifice flow meter only allows 3:1 rangeability to maintain accuracy. It is the most used flow measurement device in oil & gas plants.
How to Configure an Alarm in InTouch SCADA?
Alarms are used to give a warning message or to alert us to do something about it. Learn how to configure an alarm in InTouch SCADA software. Likewise, In industries,…
How much Pressure is applied to Inclined Water Manometer?
Inclined Water Manometer Question 1: How much pressure, in inches of water column, is being applied to this inclined water manometer to displace water 5 inches along the length of…
