Jatin Katrodiya

Jatin has 11 years of experience in the field of instrumentation and control (Engineering and commissioning domain). He has hands-on experience on DCS, ESD, F&G system, MMS, Specialized Instrumentation, Valves & Analysers. He is excellent in cross discipline coordination and interfacing (P&ID review, HAZOP, SIL Study, 3D model review etc). He is skilled in Instrument sizing e.g. Control Valve, Flow meter, PSV; UPS load calculations, Intrinsic safety validation, SIL verification etc. He is well versed with international code and standards.

Anti Surge Controller Theory

Anti Surge Controller Working Principle

Anti Surge Controller will open and close the anti surge control valve as necessary to control the compressor within operating limits.

Thermowell Immersion Length

Thermowell Insertion and Immersion Length

General guideline for thermowell sizing and length – It is important to know the difference between insertion length and immersion length.

DCS Commissioning Steps

DCS Commissioning Steps

Learn the basic commissioning steps of the distributed control system (DCS) followed during the new plant installation.

What is NEST loading in DCS

What is Nest Loading? – DCS and PLC Control Systems

Nest loading is the overall footprint of all the inputs and outputs of the control system (PLC, DCS, etc).

DCS Quiz

DCS Quiz

Test your knowledge with the 35 quiz questions and answers on the DCS (Distributed Control System) in the industrial automation systems.

Single Line Diagram of UPS System

UPS Selection Factors for a Control System

Learn basic factors for the UPS selection of a control system to provide regulated and uninterrupted power supply within tolerance.

Pressure Temperature Compensation Flow Measurement

Pressure Temperature Compensation Flow Measurement

Pressure Temperature Compensation is applicable when we have DP flow elements like Orifice, venturi, pitot tube, etc for flow measurement.

Installation of Proximitor

Determine Lifting of Shaft using Proximity Sensor

The use of proximity sensor beyond the relative vibration measurement, which is to determine the lifting of the turbine or compressor shaft.

Yokogawa DCS

Yokogawa DCS and SIS System Architecture

Learn the Yokogawa Centum VP Distributed Control System (DCS) and Prosafe RS Emergency Shutdown System (also called as SIS) Architecture.

Transmitter Performance and Calibration Frequency

How to Calculate Transmitter Performance and Calibration Frequency?

The overall performance of the transmitter is defined by the Total Probable Error (TPE). TPE is the accuracy of the