Flow Meter Questions and Answers

In this post, you can read the basic flow measurement questions and answers on flow meters which are useful for the viva, tests, and interviews.

Flow Meter Questions and Answers

What are the different types of positive displacement meters?

• Reciprocating piston type
• Rotating vane type
• Nutating disk type
• Lobed impellar type
• Oscillating piston type

What are the major three methods of flow meters?

• Area flow meter
• Mass flow meter
• Quantity meters

What are the different types of thermal flow meters?

• Heat transfer flow meters
• Hot wire flow meters

Name the different types of weighing methods

• semiconductor feed belt weighing ( Batch weighing)
• continuous conveyor scale
• radio active transmission gauge
• volumetric solid methods

Write any two points of calibration of the flow meter

• wet meter – manometer which is calibrated with mercury
• dry meter – manometer which is calibrated with mercury

Explain the principle of turbine flow meter

when the liquid enters through the inlet, due to the inflow, the shaft rotates which cuts the magnetic pickup, and produces the voltage which is proportional to the inflow of water.

List the advantages & disadvantages of turbine flow meter

Advantages

• Better Accuracy [± 0.25% to ± 0.5%].
• It provides excellent repeatability [± 0.25% to ± 0.02%] and rangeability (10:1 and 20:1).
• It has fairly low pressure drop.
• It is easy to install and maintain.
• It has good temperature and pressure ratings.
• It can be compensated for viscosity variation.

Disadvantages

• It is not suitable for non-lubricating fluids.
• They cannot maintain its original calibration over a very long period and therefore periodical recalibration is necessary.
• limited use for slurry application
• They are sensitive to changes in the viscosity of the liquid passing through the meters.
• They are sensitive to flow disturbances.
• Due to high bearing friction is possible in small meters, they are not preferred well for low flowrates.

What is Rotameter?

It is an example of a variable area flow meter. When fluid enters lopped moves from the bottom to top. Distance is proportional to the flow rate.

Explain the principle of calorimeter flow meter

Consist of two coil type resistance thermometer, the difference of temperature between the thermometer is maintained constant.

List some examples of the inferential flow meter

In the inferential type of flow metering techniques, the out-quantity flow rate is inferred from a characteristic effect of a related phenomenon.

1. Turbine flow meters
2. Target flow meters
3. Ultrasonic flow meters

If you liked this article, then please subscribe to our YouTube Channel for Instrumentation, Electrical, PLC, and SCADA video tutorials.

You can also follow us on Facebook and Twitter to receive daily updates.

Read Next:

• Averaging Pitot Tube Principle
• Different Types of Control Valve
• Flow Measuring Devices Questions
• Linear to Square Root Conversion
• What is Flow Meter Accuracy?