Transformer Construction

The most widely used material in the core of the transformer is

I. Pulse transformers use soft ferrites.
II. The transformers used in the radio recievers use air core.

The shell type transformers have, LV and HV windings are arranged such that

Consider two transformers X and Y having identical ratings, but have flux densities of 1.5T and 2T respectively. The weight of the transformer B per KVA will be

The leakage flux is the flux in side the transformer which

A coupling magnetic field inside a rotating machine or static machine like transformers must involve with
I. electrical system to extract energy from electrical system.
II. mechanical system to extract energy from electrical system.

Transformers do not require any type of cooling as it well ventilated.

Core type transformers have, LV and HV windings are arranged such that

The primary and secondary of a transformer are ________ coupled but _______ connected.

Consider two transformers X and Y having exact ratings, but have flux densities of 1.5T and 2T respectively. The weight of the transformer A per KVA will be

It is advised that staggering of the butt joints

Stepping of the core is implemented in the core to

A coupling magnetic field inside a rotating machine or static machine like transformers must involve with

A transformer has comparitively much higher efficiency than a similar induction machine due to

It was needed that to isolate dc noise coming from the transmitted signal, to attain the same which machine can be used without suffering significant loss

We can employ transformers for a power range of