Learn the water fountain control logic using the PLC timers programming to control the high and low spray modes.
This PLC example on manufacturing line assembly is an intermediate-level PLC program prepared for the students to learn the programming.
In this article, you will learn the PLC project examples for EcoStruxure Machine Expert software from the Schneider Electric.
Learn the PLC logic example on multiple switches and motors with the ladder diagram.
PLC Programming Example on multi-motor control for beginners using Schneider Electric EcoStruxure Machine Expert Basic PLC software.
Determine the necessary PLC switch actuation status (i.e. low versus high process stimulus) to turn the yellow lamp on.
Sketch a Ladder Diagram program for this PLC to energize the lamp if the following input conditions are met.
Suppose we have a PLC connected to three pushbutton switches. Sketch a Ladder Diagram program for program example.
Suppose we have an Allen-Bradley MicroLogix 1000 PLC and two pressure switches we need to connect to it.
Question & Answer - A PLC has been programming to control the starting and stopping of a three-phase electric motor.
