Categories: Power Systems

Harmonics Disadvantages in Power System

Sources of Harmonics:

Several sources of harmonic currents that may be found on electrical power distribution networks are listed below:

  • Variable speed motor drives
  • Rectifiers
  • Arc furnaces
  • Wielding equipment
  • Uninterrupted power supplies
  • Switching mode power supplies
  • Compact fluorescent lamps
  • Electronic ballasts

Disadvantages of Harmonics:

Harmonics degrades the performance of power system. Some of the disadvantages of harmonics in the power distributed network are listed below:

  • The harmonics flowing in the distribution network downgrade the quality of the electrical power supply. There can have several negative effects on the operation of the power system
  • Increased losses on the distribution system due to increase in the effective rms current
  • Over-load in neutral conductors due to cumulative increase in the third harmonics created by the single phase loads
  • Overloads, vibration and premature ageing of the generators, transformers and motors as well as increase in the noise level
  • Overloads and premature ageing of the power factor correction capacitors
  • Distortion of the supply voltage that can disturb the operation of the sensitive loads
  • Disturbances in the communication networks and telephone lines
  • Resonance between the supply inductance and capacitance of the power factor correction capacitors
You've successfully subscribed !
Share

Recent Articles

PLC Ladder Logic Design: Control 3 Motors with Toggle Switch
  • PLC Tutorials

PLC Ladder Logic Design: Control 3 Motors with Toggle Switch

PLC ladder logic design to control 3 motors with toggle switch and explain the program…

3 weeks ago
  • PLC Tutorials

VFD Simulator Download – Free Yaskawa V1000 Software

VFD simulator download: Master the online tool from the Yaskawa V1000 & programming software for…

4 days ago
  • PLC Tutorials

Conveyor Sorting Machine PLC Program with Calculation Function

The conveyor sorting machine is widely used in the packing industries using the PLC program…

7 days ago
  • PLC Tutorials

Example of Flip-Flop PLC Program for Lamps Application

Learn the example of flip-flop PLC program for lamps application using the ladder logic to…

7 days ago
  • PLC Tutorials

STAR DELTA Programming using PLC Controller

In this article, you will learn the STAR DELTA programming using PLC controller to start…

1 week ago
  • Instrumentation Design

Single and Three Phase Immersion Electrical Heaters Wiring Circuits

Lube oil consoles of rotary equipment packages in industrial process plants are usually equipped with…

5 days ago