Electric Circuits Objective Questions
0%
If a resistor and an inductor are connected in series across a voltage source. Which two parameters in that circuit increase if frequency of voltage source increases?
Correct!
Wrong!

If a resistor and an inductor are connected in series across a voltage source. Which two parameters in that circuit decrease if frequency of voltage source increases?
Correct!
Wrong!

If a resistor and a capacitor are connected to form series R  C circuit across a voltage source. If frequency of voltage source increases
Correct!
Wrong!

A branch of a network is said to be active when it consists of one
Correct!
Wrong!

A branch of a network is said to be passive when it contains
Correct!
Wrong!

Which of the following is not a bilateral?
Correct!
Wrong!

Which of the following characteristics is attributed to an ideal independent voltage source?
Correct!
Wrong!

Dependent source of current and voltage are those which have
Correct!
Wrong!

The internal resistance of a practical voltage source is considered to be connected in
Correct!
Wrong!

R_{1} = 36 Î© and R_{2} = 75 Î©, each having tolerance of Â±5% are connected in series. The value of resultant resistance is
Correct!
Wrong!

A particular current is made up of two component : a 10 A and a sine wave of peak value 14.14 A. The average value of current is
Correct!
Wrong!

The switch S is the circuit shown in figure is ideal. If the switch is repeatedly closed for 1 ms and opened for 1 ms, the average value of i(t) is
Correct!
Wrong!

The linear circuit element is
Correct!
Wrong!

Active element of electrical circuit is
Correct!
Wrong!

The basic circuit elements are
Correct!
Wrong!

The form factor of sinusoidal alternating current is
Correct!
Wrong!

The rms value of sine wave is 100 A. Its peak value is
Correct!
Wrong!

A network contains linear resistors and ideal voltage source s. If values of all the resistors are doubled, then voltage across each resistor is
Correct!
Wrong!

In the network shown, what is the current I in the direction shown?
Correct!
Wrong!

An electrical circuit with 10 branches and 7 nodes will have
Correct!
Wrong!

A certain network consists of large number of ideal linear resistances, one of which is designated as R and two constant ideal source. The power consumed by R is P_{1} when only the first source is active and P_{2} when only second source is active. In both sources are active simultaneously then the power consumed by R is
Correct!
Wrong!

For the circuit given in the figure the power delivered by the 2 V source is given by
Correct!
Wrong!

In the circuit shown in the figure, the value of V_{s} is 0, when I = 4 A. The value of I, when V_{s} = 16 V, is
Correct!
Wrong!

In the figure given, the value of R is
Correct!
Wrong!

In the given figure the value of the source voltage is
Correct!
Wrong!

In active filter which element is absent?
Correct!
Wrong!

Advantage of active filter is
Correct!
Wrong!

Disadvantages of constant k type filter
Correct!
Wrong!

In Cauer 1st form last element in the network is
Correct!
Wrong!

A circuit with resistor, inductor, capacitor in series is resonant of 50 Hz. If all the values are now doubled, the new resonant frequency is
Correct!
Wrong!

Similar Articles:
 Top 100 PLC Objective Questions and Answers
 Power Electronics Objective Questions
 Objective Questions on Valves
 100 PLC Quiz Questions : True or False
 Pneumatic Systems Objective Questions
 PLC Programming Questions & Answers – 1
 PLC Multiple Choice Questions
 MCQ on Measurement and Instrumentation
 R RC Firing Circuits Disadvantages
 Programmable Logic Controller Practice Tests