PLC Tutorials

Difference between Induction motor and Synchronous motor

Induction Motor:

  • 3 phase induction motor is self starting. Self starting torque is generated hence no special means is required for starting of Induction motor. It is to be remembered that Auto transformer starter, Star-Delta starting and other type of starters are employed to reduce the inrush starting current.
  • Speed of the induction motor falls with the increase in the load. Induction motor always runs below synchronous speed
  • Induction motor always operates on lagging power factor and during light loads power factor of  induction motor will be very poor
  • Induction motor requires no dc excitation to the field and hence it is singly excited machine
  • Speed of the induction motor can be controlled however it is limited
  • It is used to supply mechanical load to drive the load
  • Its torque is more sensitive to change in the input volatge
  • It is simple, rugged in construction and is comparatively lower cost

Synchronous Motor:

  • Synchronous Motor is not self starting (it don’t have self starting torque), therefore some external means is required for its starting
  • Speed of the Synchronous machine is constant and is independent of the load
  • It can be operated under a wide range of power factor, both leading and lagging
  • It requires dc supply for field, so synchronous motors are doubly excited
  • Speed control is not possible
  • Synchronous motor is used for supplying mechanical load to drive and also used for power factor improvement (when synchronous motor operates under over excited condition it delivers reactive power to the system)
  • Torque of synchronous motor is less sensitive to the supply voltage
  • Construction wise it is complicated compared to induction motor, maintenance is required and also initial cost is also high compared to induction motor.
You've successfully subscribed !

View Comments

Share

Recent Articles

Example PLC Program to Control a Pump based on Level Sensors
  • PLC Tutorials

Example PLC Program to Control a Pump based on Level Sensors

Learn an example PLC program to control a pump based on level sensors using ladder…

2 weeks ago
  • PLC Tutorials

PLC Timer Application in Security Camera Recording

In the PLC timer application for security camera recording, when motion is detected then camera…

2 weeks ago
  • PLC Tutorials

Batch Mixing with PLC Ladder Logic Program

In this example, we will learn batch mixing with PLC ladder logic program using timer…

2 weeks ago
  • PLC Tutorials

PLC Example on Manufacturing Line Assembly

This PLC example on manufacturing line assembly is an intermediate-level PLC program prepared for the…

2 weeks ago
  • PLC Tutorials

PLC Programming Example with Pushbutton and Motor

In this article, you will learn the PLC programming example with pushbutton and motor control…

3 weeks ago
  • PLC Tutorials

Boolean Logic to PLC Programming

This article teaches how to convert Boolean logic to PLC programming ladder logic with the…

1 month ago