Distillation Tower Displacer Level Instrument Check
Explain how you would check the calibration of displacer level instrument while the distillation tower was running.
Editorial Staff
Calculate the 0%, 50%, and 100% Calibration Points
Calculate the 0%, 50%, and 100% calibration points for the DP transmitter to measure liquid level in this vessel.
Purpose of Loop Diagrams
Loop diagrams are very important Instrumentation design deliverables. Their purpose is to represent components of a instrument loop.
Pneumatic Signal Piping and Fittings
Learn about pneumatic signal piping and fittings related to industrial instrumentation in oil and gas companies.
Pneumatic Piping Design and Specification
Pneumatic piping employed in oil and gas plants is used to provide air for the operation of instruments and other devices.
100 Electrical Circuit Breaker Quiz
Test your knowledge with the 100 quiz questions and answers on the electrical circuit breaker, generators, and electrical equipment.
Nuclear Plant Sensors and Detectors Quiz
Test your knowledge with the 60 quiz questions and answers on the nuclear plant sensors and detectors.
Flange Types and Definitions
The most used flange types according to ASME B16.5 are Welding Neck, Slip-On, Socket Weld, Lap Joint, Threaded and Blind flange.
Determine Level of Liquid in the Vessel and its Specific Gravity
From these pressure measurements, determine the level of liquid in the vessel and its specific gravity using three transmitters.
Question on Remote Seal with Capillary Tubing Transmitter
The DP transmitter is located 5 feet above the bottom of the vessel and has a remote seal with capillary tubing with fill fluid.